-->September 6th, 2025<--
Thank you to GolfCharlie and Claude Code for fixing the code to work with the newly changed FAA API! They have saved a lot of time. A new image has been created and will be uploaded today and available later tonight. If you don't want or need the image, you can visit https://github.com/markyharris/livesectional and incorporate the changes into your board now.
--->September 5th, 2025<--
There has been another change to the FAA API which has again broke the map. We are currently working on this. Check back for fix. If you have the fix please post it. - Mark
Hello,
Is it possible to get the STL files for the 3D printed parts for the WBBB build? The web site mentions the file, and also a template for marking the location of the holder, but doesn't actually have the file.
Thanks, that would be really helpful. Great work, and great inspiration to give us something to do while we are down due to the coronavirus!
Here you go. The web site is still under development and there are a lot of details still needing to be covered. But for now you can grab them here. This zip file contains 3 files;
- MBBB Mount.stl
- MBBB Template.stl
- Ambient Sensor Mount.stl
The MBBB Mount is the main part that holds the LED in place. The template is there to help align the mount and the sensor mount is optional if you want to drill through the map to mount a sensor. In reality I found it easier to mount the sensor on top of the top rail and drill a hole through the top rail to accommodate the needed wires.
Hope this helps. Post pictures when you get time. - Mark
any recommendation on a 3D printer
I'm using the Ankermate and really love it. I'm sure there are others out there that will do a great job, though. - Mark
