Last seen: Mar 7, 2026
@captain_ron, This happens sometimes when you have previously SSH'd into a pi and then have re flashed the micro SD. The computer recognizes the hard...
@captain_ron I use terminal exclusively when working on my livesectional. ssh pi@10.82.140.103 insert the ip address of your pi. When i...
Hi Bart, User: pi pass: livesectional Thanks, Bill
Hi Julien, The European stations are not a problem. We have had users in Ireland and Switzerland make maps with great success. You can check a ...
Hi @16Never, Yes the ZeroW will work fine for these projects. Looking forward to seeing your builds. Thanks, Bill
@rickw Two things you can try. Run another ground from your bread board to a ground on your pi. Another thing would be to change from RGB to GBR o...
Hi dhacks, There is a little screw on the unit that you can turn to control the sensitivity. And two LED's one power indicator and one for sensitivi...
As discussed off this site running sudo raspi-config and connecting the pi to your WiFi resolves this issue. We will try to update the documentation t...
When in the command line on your pi to edit the airports use the following command... sudo nano /Neosectional/airports when done editing... cont...
Are the LED's still responding as you would expect showing accurate weather?
@swish We will look into this feature request. Thanks, Bill
Are you just looking for a user defined shutdown time, or are you also wanting boot up time as well? If you wanted boot up as well we would need to l...
Hi @juls, 1. The DL Config.py button is coming out in V3.0.1 due out at the end of this week. It also includes the ability to DL your airport file...
Hi @Jsnavely, Try stopping the map, and then starting the map. What do you get for a result? Thanks, Bill