Last seen: Mar 5, 2026
Double check that you have 114 populated in both the Settings/Basic Settings editor and also in the Airports Editor. Let me know what you find. - Mark
Yes, on the airports editor page on the LED's that you do not want to light up, put 'NULL' into the field rather than an airport ID. If this is not ...
Ron, be sure that you select 'Save' under the editor menu after you upload. I've had this happen to me a few times where I import the file but forget ...
Thank you to GolfCharlie and Claude Code for fixing the code to work with the newly changed FAA API! They have saved a lot of time. A new image has be...
There has been another change to the FAA API which has again broke the map. We are currently working on this. Check back for fix. If you have the fix ...
This question fell through the cracks. Please bounce back to me if the problem is still occurring. - Mark
Hi, sorry for the issues. I believe I ran into something similar with a Zero and it was due to the fact that the log files were taking up so much spac...
I'm using the Ankermate and really love it. I'm sure there are others out there that will do a great job, though. - Mark
Sorry for the delay. Did you find a resolution? If not, let me know where you are and I'll do my best to help. - Mark
Sorry for the delay. Did you find the problem? - Mark
What did you find? We'd love to hear. - Mark
Ron, I've never tried that. I would go into Raspi-config and manually define the username then leave the password blank and see if that works. Please ...
I'm sorry, I just saw this question: Be sure to check the number of LED's in the editor is set correctly. There are 2 places. One in the Airport edito...
To be clear, the LED's on the map work properly for European airports, but the weather that is displayed on the Airport editor shows UNDF for European...
Hi, disconnect everything from the RPi and with a monitor connected, reboot. If you see the software output showing that the software is working, then...