-->September 6th, 2025<--
Thank you to GolfCharlie and Claude Code for fixing the code to work with the newly changed FAA API! They have saved a lot of time. A new image has been created and will be uploaded today and available later tonight. If you don't want or need the image, you can visit https://github.com/markyharris/livesectional and incorporate the changes into your board now.
--->September 5th, 2025<--
There has been another change to the FAA API which has again broke the map. We are currently working on this. Check back for fix. If you have the fix please post it. - Mark
My test board is up and running and will randomly restart flashing all leds and then coming back up.
Not why its doing that?
Thank you
Tom
Hi Tom,
Glad that you got it up and running. The problem, in my experience is that you don't have a good ground connection between the LED's and the RPI. These two items must share the same ground plane. You may need to use different terminals in the breadboard, because they can be notorious for intermittent connections. - Mark
Thanks for the fast reply, i added a extra wire from the power supply to the LED line.
I also added 2 ground wires from the board to the RPI #30 & #34
I let you know how its goes..
Thanks
Tom
