Last seen: Aug 24, 2026
Sounds good. cd /NeoSectional cd /templates sudo nano -c confedit.html Scroll down to around line 61 and find this segment of code; <tr> ...
I can certainly increase that value. But I don't know what the physical limit would be. 500 was an arbitrary value. So let me know what number you wou...
There has to be a problem with the networks, or possibly a firewall blocking it. That's very odd. - Mark
Send a pic of the browser withI'd like to see it if you don't mind. The ping command will go on forever. You have to ctrl-c to stop it. Sorry I sho...
Connection Refused is usually caused because the ':5000" is missing. So just to amplify, it needs to befor it to work, assuming that's the IP address ...
Good, that's the correct RPi IP so putting it into the browser with the :5000 appended is what you need to do. The fact that you tried this and its st...
Ok, then next take a look at the logfile. cd /NeoSectional sudo nano logfile.log You can copy and paste the bottom portion here for me to look ...
I am wondering if the URL is wrong. The zero in 192.168.0.114 is normal reserved for router level URL's. I could be wrong but I have never seen this l...
Hi, this typically happens because the URL was not properly entered into the web browser. For instance if your RPi's IP address is; 192.168.1.1 T...
That looks great. Here's the OS information from the 'System Information' page of the web interface; OS Info PRETTY_NAME="Raspbian GNU/Linux 10 (...
Thanks for that insight. I know that the map cannot be running if the individual lights are needed to be controlled via the airports page. So maybe th...
I'm sure it can, but from a practical standpoint its hard to believe a board could be built that would support more than 500. If you would like more, ...
I'll have to download the latest image and verify. For now, if you don't use the 'check for update' menu item you won't get that error message. Once I...
I have never tried it. Sounds interesting though. The only concern might be the pin numbering. The software is hard coded to specific GPIO's on the RP...
Thanks for the update. I know we had the same issue with the 4a when it came out, but the update discussed took care of the issue. I'll have to purcha...